Save2FTP

Technical support for APBackUp users
Post Reply
Paul
Posts: 3
Joined: 24 Feb 2005, 11:57

Save2FTP

Post by Paul »

I am looking at Save2FTP and I cant get it to upload immediately a trigger becomes true. It always has a delay of hours.
How do I get it to upload immediately on a file change ?
support
AVPSoft support
AVPSoft support
Posts: 326
Joined: 01 Nov 2004, 21:25
Contact:

Post by support »

It seems like you set "start after timeout" on the "Schedule" panel. Set it to 0:00:00 and the task will start immediately
Paul
Posts: 3
Joined: 24 Feb 2005, 11:57

Save2FTP

Post by Paul »

Thanks for that, but I must be going crazy.
On the schedule window, I cannot set the clock to 00.00.00, it just goes back to 12.00.00 or whatever, or I can set it to anything except 00.00.00
I'm sure there must be a way to do it, I just can't find it.
support
AVPSoft support
AVPSoft support
Posts: 326
Joined: 01 Nov 2004, 21:25
Contact:

Re: Save2FTP

Post by support »

Paul wrote: I'm sure there must be a way to do it, I just can't find it.
Try to do it through direct input of '0', or set '0:00:01' (one second).
Paul
Posts: 3
Joined: 24 Feb 2005, 11:57

Save2FTP

Post by Paul »

The time cannot be set to anything less than an hour. It works at 1 hour, but the clock cannot be set for anything less than that.
Any other suggestions.
support
AVPSoft support
AVPSoft support
Posts: 326
Joined: 01 Nov 2004, 21:25
Contact:

Post by support »

Obviously the problem is in 12 hours time format in your system.
You can change it in Windows "Control Panel"->"Regional Options" to 24 hours time format.
Post Reply